CAL BLOCK

Protect Against Buildup Fast

CAL BLOCK | #1 Surface Shield

SEEN & TRUSTED BY PROS

BUY NOW DIRECT FROM HOME DEPOT

BUY NOW DIRECT FROM AMAZON

POOL & PATIO PROTECTION MULTI-SURFACE PROTECTANT

NANO FORMULATION TECHNOLOGY

CAL BLOCK is a non-toxic, invisible, nano-formulated protectant that helps block calcium and hard scale from damaging pool tiles, water features, and more. It makes future buildup easier to clean and works on a variety of surfaces including glass, tile, concrete, rock, and metal. Reapply every 3–6 months to reduce buildup and simplify maintenance.

• Protects pool tile, rock features, concrete, glass, and more
• Shields surfaces and waterlines from calcium and efflorescence damage
• Prevents hard scale buildup before it bonds
• Makes treated areas easier to clean and maintain
• Non-toxic, environmentally safe, and safe around water
• Keeps surfaces looking fresh and like new
• Quick application — works in minutes, lasts for months
• Easy to apply with a sprayer or brush

Why You Will Love Cal Block!

If you’re looking to protect your pool tiles and surrounding materials from calcium and hard scale buildup, Cal Block is the perfect solution. This multi-surface protectant helps reduce future buildup, restores surfaces to their original beauty, and makes treated areas significantly easier to clean. Safe, non-toxic, and easy to apply, Cal Block is the smart way to maintain your pool’s appearance with minimal effort.

Cal Block works on tile, porcelain, glass, concrete, pavers, rock features, and more. It’s a highly versatile solution compatible with most materials commonly found around pools. For the best results, apply every 3 to 6 months to prevent calcium and efflorescence buildup. You can use it on both new and previously installed materials — as long as the surface is clean and dry.

Application is simple. Cal Block should always be the final layer applied — after sealers or any other treatments. It’s not a coating and dries clear and invisible. Just make sure the surface is clean and dry, and remove any fish from the area (Cal Block can be harmful to aquatic life until dry). Spray the product evenly, let it dry, then apply a second coat. Buff off any residue on polished surfaces if needed. That’s it — it’s fast, effective, and long-lasting.

If you’re looking to:

• Protect pool tile, rock features, concrete, glass, or other materials
• Defend surfaces from calcium and efflorescence damage
• Stop hard scale buildup before it bonds
• Make surfaces easier to clean and maintain long-term
• Use a non-toxic, eco-safe protectant
• Keep surfaces looking like new
• Apply a solution that works in minutes and lasts for months
• Easily apply with a sprayer or brush

Then Cal Block is exactly what you need. Each gallon covers approximately 1,000–1,300 square feet, giving you excellent value and professional-grade results. Whether you're maintaining a new installation or restoring an older surface, Cal Block delivers unmatched protection and performance.

Available in Quart Trigger Spray, Half Gallon, 1 Gallon, 2.5 Gallon Jug, 5 Gallon Pail, 16 Ounce Trigger Spray, 8 Ounce Finger Spray

Cleaning & Maintaining Your Pool Tiles Is Now As Easy As 1, 2, 3!

CLEANED WITH HEAVY CALCIUM RELEASER, THEN APPLIED TR3, AND THEN CAL BLOCK

DIRECTIONS:

Cal Block should be the final product applied to any surface, even after sealers. This is not a coating or topical — Cal Block is completely invisible once dry and will not alter the appearance of the surface. Only apply to new or clean, dry existing surfaces.

Application Steps:

1. Lower the water level below the tile line or turn off water features as needed to access the treatment area.
2. Spray Cal Block evenly onto the clean, dry surface and let it dry for 5–10 minutes. A second coat is recommended to ensure complete protection.
3. After the second coat dries, buff off any excess residue on polished surfaces. If spotting appears, lightly respray Cal Block and wipe immediately.
4. Once fully dry, the surface is ready for normal use and water exposure.
5. Maintain treated surfaces with LayorCare’s Pre-Treat Cleaner, brushing or scrubbing as needed. To remove any future calcium or efflorescence buildup, use LayorCare’s Heavy Calcium Releaser.

Important Notes:

1. DO NOT DILUTE. USE AS IS.
2. KEEP OUT OF REACH OF CHILDREN AND PETS.
3. COVERAGE: 1,000–1,300 sq. ft. per gallon

From RS Technologies – Advanced Technology for Tile & Stone.