Grip. Guard. Prevent. Protect.
NO SLIP
Acid-Free | Non-Toxic | Environmentally Safe
🟠 New Micron Engraving Technology
🟠 Increases the Coefficient of Friction on Wet Surfaces
🟠 Safe and Easy To Use
Instant Slip Resistance! Water-Based, Non-Toxic
LayorCare NO SLIP | Anti-Slip Tub & Tile Treatment
Works in under 10 minutes – Exceeds ADA, ASTM, OSHA & DIN standards
LayorCare NO SLIP uses advanced water-based Micron Engraving Technology to increase traction and reduce slip risks on wet surfaces. Perfect for tubs, shower floors, ceramic and porcelain tile, natural stone, and concrete — without changing the appearance of the surface. Provides invisible protection for children, adults, and seniors in any high-risk, wet area.
Application Instructions:
- Clean surface thoroughly before application
- Apply NO SLIP evenly to wet bathtubs, showers, tile, stone, or concrete
- Let sit for under 10 minutes for full effect
- Rinse and wipe down surface thoroughly
- Surface ready for use immediately after drying
- Increases coefficient of friction to meet/exceed all major safety standards
- Safe, non-toxic, and easy to use with no visible change
- Ideal for bathrooms, pool decks, kitchens, and entryways
Available in Quart Trigger Spray, Half Gallon, 1 Gallon, 2.5 Gallon Jug, 5 Gallon Pail, 16 Ounce Trigger Spray, 8 Ounce Finger Spray
All coverage estimates are approximate.
DIRECTIONS:
KEEP OUT OF REACH OF CHILDREN. Always test in an inconspicuous area first to ensure surface compatibility. Suitability for use is the responsibility of the user.
- Ensure the floor is clean, dry, and free of dirt, grease, or oil.
- Pour NO SLIP directly onto the surface and spread evenly using a mop or cloth.
- Allow the product to sit for 7 minutes — do not let it dry on the surface.
- If drying occurs during treatment, reapply NO SLIP to keep the surface wet.
- After 7 minutes, rinse thoroughly with clean water to remove all residue.
From RS Technologies – Advanced Technology for Tile & Stone
