WET LOOK SEAL

Enhance Your Stone's Glow Fast

WET LOOK SEAL | #1 Gloss Finish Sealer

Lasts Up to 5 Years! Water-Based, Non-Toxic Protection

LayorCare Wet Look Seal (Water-Based) | Pool & Patio Sealer

1 Gallon covers up to 400 sq. ft.

Preserve that rich, elegant “wet” look while protecting your surfaces from water, dirt, and mildew. Perfect for natural stone, rock water features, aggregate, brick, and more — Wet Look Seal enhances color depth, restores luster, and shields against UV damage without yellowing, cracking, or peeling. Long-lasting and low-maintenance, it provides up to 5 years of beauty and protection.

Application Instructions:

• Allow newly grouted surfaces to cure for at least 48 hours before sealing.
• Clean the area with LayorCare Pre-Treat Cleaner, Heavy Calcium Releaser, or Multi-Blaster as needed.
• Rinse thoroughly and allow surface to dry completely.
• Apply Wet Look Seal using a brush, roller, or airless sprayer.
• Use full strength only — do not dilute.
• Two coats are recommended; allow the first coat to dry to the touch before applying the second.
• Surfaces are walkable after 3 hours.
• Allow to cure for 24 hours before exposing to standing water (pools, fountains, spas).
• Coverage: approximately 400 sq. ft. per gallon per coat.

Available in Quart Trigger Spray, Half Gallon, 1 Gallon, 2.5 Gallon Jug, 5 Gallon Pail, 16 oz Trigger Spray, 8 oz Finger Spray

BUY NOW DIRECT FROM AMAZON

TRAVERTINE PAVERS

LayorCare Wet Look Seal is a low V.O.C., water-based sealer formulated to enhance and protect hardscapes while delivering a rich, long-lasting "wet" finish. It can be applied just 48 hours after installation and is safe for use on a wide variety of surfaces. This advanced formula won’t yellow, crack, or peel, helps reduce calcium buildup, and provides strong UV protection to preserve your surface’s appearance for years to come.

DIRECTIONS:

KEEP OUT OF REACH OF CHILDREN. Always test in an inconspicuous area before full application. Determining surface compatibility is the responsibility of the user.

• Allow newly grouted surfaces to cure for a minimum of 48 hours.
• Clean the surface with LayorCare Pre-Treat Cleaner, Heavy Calcium Releaser, or Multi-Blaster depending on the condition of the surface.
• Rinse thoroughly and ensure the area is completely dry.
• Apply Wet Look Seal with a brush, roller, or airless sprayer.
• Apply two coats for best results, allowing the first coat to dry to the touch before applying the second.
• The surface is walkable after 3 hours.
• Allow a full 24-hour cure before exposing to standing water (pools, fountains, spas).

From RS Technologies – Advanced Technology for Tile & Stone